New Inventory

OWN YOUR ENVIRONMENT IN ANY SEASON    Time-tested, easy to operate & service, the ProCut S has high visibility and the ability to reduce trimming time under low-hanging branches, shrubs and fencin...

        Produce Skidsteer Bucket   No sharp edges for gentle handling of produce  Screened back for better visibility  31" deep, 31" high  Made of the same...

BEST IN HIGH CAPACITY AND CHOP QUALITY   No one builds rugged, high-capacity forage harvesters like New Holland. The best-selling line of pull-type models provides the uniform chopping you're looking fo...

       PTO Adapter Three Point Hitch   Adds a hydraulic PTO and three point hitch to any skidsteer  Ideal for brush cutters & snow blowers etc  ...

Pulsar    The PTO powered Pulsar series of rotary cutters provide excellent mowing and shredding performance for tractors rated between 20-50 HP. The 3PH mount models are available in a variety of cutt...

Pulsar Finishing Mower    Pulsar Finishing Mowers float smoothly over your lawn giving it the professional manicured look without the cost. Available in 4 sizes, these rear discharge mowers are equippe...

Pulsar Plus    Now available, the Pulsar Plus series of PTO powered rotary cutters provides increased cutting and shredding performance. Available in 60"-120" sizes the redesigned stump jumpe...

Pulsar Skidsteer    Designed for mowing fields and light brush up to 2" in diameter, hydraulic Pulsar models are the ideal cutting attachments for skid loaders. The hydraulic motor is matched to t...

Pulsar Wing    New for 2017, MK Martin presents the Pulsar Wing. Available in a 15' model, the three triple blade assemblies make short work of stubble whether in the pasture, field, or brush. Each...

Set it and forget it...    Our engineers worked hard to make the PW8 as user friendly as possible, from easy installation to time saving innovations, it all adds up to harvesting performance you can co...

Setting a higher bar for rotary disc performance.  If you’ve been looking for a header that cuts alfalfa at speeds up to16 MPH (26 km/h) and powers through 12' (3.6 m) of cane or a heavy winter forage ...

The Haymaker  Speed, precision, performance, that's exactly what you get with the MacDon M1170 Windrower and R1 Series Disc Header. Our patented CrossFlexTM suspension and low-profile, forward-mounted cuttin...

The RDX-117 Rotating drum allows snow to be ejected out left or right side or center chute  The Schulte’s RDX-117 incorporates a 38” Five paddle open center cupped style fan which improves performan...

         Regular Duty Stone Fork & Regular Utility Grapple   Same great features as regular & heavy duty stone forks  Opens up to 70"  Comes with 2-½&...

Regular Duty Stone Fork with Retainer Style Tine & Skidsteer Grapple   Designed for use on skidsteers with limited clearance for grapple arms  Same great features as regular & heavy duty stone...

Regular Duty Universal Skidsteer Quick Fit Plate   3500 lbs capacity  Compatible to universal skidsteer attachments  Spring-loaded over-centre lever lock  Comes complete with new pins  ...

Regular Utility Grapple   Can be fitted to models SB, SBHV, MB, MBHV, MFE, & SFR  Accommodates 4ft round bales  Works equally well on other materials such as manure, etc.  Opens up to 70...

     Ready To Roll?  Whether You’re A Part-time Farmer Occasionally Baling 20 Acres Or A Custom Operator With 20 Customers, There’s A New Holland Roll-belt™ Baler To Suit You...

Root Rake c/w Grapple   Two independent grapples for complete clamping on awkward loads  34" overall height when closed  Points are 1/2" thick, 400 Brinell high tensile steel  7-3/...

Rotary Tiller    Prepare your seedbed or garden for planting using the MK Martin Rotary Tiller. With standard features such as adjustable skidshoes, floating deflector, replaceable tines, and an oil ba...

FARM KING HAS A COLLECTION OF ROTARY TILLER MODELS TO SUIT YOUR GARDEN AND LANDSCAPING NEEDS.  The tiller attaches to the three-point hitch and is designed to fit a variety of tractors, from 12 hp to 65 hp. Till...

         Rotating Pallet Fork   Rotation is powered by a cylinder for smooth and contoured operation  Adjustable tines  Rotates 180° for a full dump to the left ...

 Round Bale Grapple (BG4000)   Designed for gentle handling of heavy wrapped silage bales  Lockable arms, one arm can be locked in a fixed position using pins so that all movement occurs in the o...

RS320 Rock Picker features an extra large 3.2 cubic yard (2.43 m3) hopper for greatly increased rock removal efficiency. The RS320’s hopper has twice the capacity of an average rock picker hopper.  The RS...

Rubber Feed Alley Scraper   Power angle  Easy on concrete or tiled floor mangers  24" high  Angles 45° either direction           ...

The Schulte SBX-87”(221cm) Schulte snow blower works with all popular skid steers.  A 3pt version is also available for 25-65hp tractors.  Built with the legendary Schulte quality and durability, bot...

Scrap Grapple Bucket (Skidsteer)   Two independent grapples  1/4" material, 3/8" end plates  3/4 X 6 bevelled cutting edge  Ideal for awkward abrasive loads  31" overall ...

102” wide cut & efficient twin stage design ideally suited to 85-140 HP tractors w/ SDX-102.  Highly efficient 30” four paddle fan on the SDX-102 and 26” four paddle fan on the SDX-840, wi...

Schulte’s SDX-117 incorporates a 38” Five paddle open center cupped style fan which improves performance and is larger than most competitive designs on the market.  On the SDX-117, a 1000 RPM gear d...

Self Powered Snow Thrower   MK Martin is happy to introduce a new self powered snow thrower for compact skid loaders and tractors without hydraulic remotes. While being easy to attach with no drive lines o...

Swather Draper Heads (4 Wheel Steer)  Accepts Agco, Challenger, Hesston, MacDon and Massey Ferguson brands only    Notched rail for easy header placement  Tapered roller bearings on king pins for...

Swather Draper Heads (4 Wheel Steer)  Accepts Agco, Challenger, Hesston, MacDon and Massey Ferguson brands only    Notched rail for easy header placement  Tapered roller bearings on king pins for...

        Side Discharge Sand Bucket   Minimum 12 GPM required  Made of same material as sawdust bucket  Baffle brace and beater to improve flow and keep weight off belt  3...

        Side Discharge Sawdust Bucket   Minimum 12 GPM required  Hydraulic drive (coupled direct)  Beater to prevent bridging  Discharge from either side of machine&...

        Side Discharge Straw/Lime Bucket   Minimum 12 GPM required  Hydraulic drive (coupled direct)  Agitator prevents material bridging  Secondary metering drum regulat...

        Side Shift Pallet Fork   Hydraulic carriage side shift  16" travel (8" right or left)  Adjustable tines           ...

Silage Facer - Bucket Mount   Minimum 20 GPM required  Maximum flow 40 GPM  Facing drum mounted on bucket  400 Brinell high tensile steel teeth on drum  Dual drive motors  Heavy du...

Silage Facer - Frame Mount   Minimum 20 GPM required  Maximum flow 40 GPM  Facing drum mounted on a 4 ft frame  400 Brinell high tensile steel teeth on drum  Includes hose kit and flat-...

Silage Grapple Bucket   Heavy duty grapple integrated into the bucket design  Strategic pivoting arc design on the grapple for more power and less disturbance of the bunk silo face  3 X 16 cylind...

Single Arm Log Grapple   Removable log grapple for pallet forks  Clamps onto Class II or III fork frame (walk through guards only)  C/w Hydraulic cylinder           ...

Single Prong Bale Spear   Kverneland tine  Easy stabbing & removal  2000 lbs capacity @ 24" L.C.  Available with 39" or 49" tine  Two stabilizer tines  Approxima...

Single Prong Bucket Spear   Kverneland tine  2000 lbs capacity @ 24" L.C.  Adaptable to most buckets  No tools or bolts needed  Comes with chain & tightener  Approximate w...

Single Three Point Hitch Spear   Reese receiver / ball hitch (Ball hitch not included)  Fits both CAT I & II  Kverneland tine  2 stabilizer tines  2000 lbs capacity @ 24" L.C.&...

       Skidsteer Grader   Push-pull design for grading in forward or reverse  Pneumatic swivel wheels on oscillating front axle  Extendable front axle bolster for better stabi...

SMR-600 6′ Skid Steer Multi Rake Windrower, the Perfect Tool for your Skid Steer: Windrowing, Landscaping Soil Conditioning and Sweeping  The rototilling action of the SMR-600 breaks lumps, roots and...

The rototilling action of the SMR-800 breaks lumps, roots and other debris while reclaiming rocks by forming them in uniform rows.  The 2″ and 4″ replaceable teeth give you greater ground ...

Square Bale Grapple (BG6000)   Same specs and design as round bale grapple with arms to accept square bales 4 - 6 ft long and round bales 5-6 ft diameter  Opens up to 84"  Approximate weight...

Square Bale Squeeze (BG7000)   86" extended – 30" Retracted  Arms are 50” long, 20” tall  2-½" x 28" stroke cylinder  Slim brace arm design allow...

RIDE CONFIDENTLY INTO NARROW SPACES WITH ADVANCED COMFORT AND STABILITY    The SRS™ Z1 offers all of the same great productivity and comfort as the larger SRS Z2, but in a more compact package. ...

A COMBINATION OF SPEED, AGILITY AND HIGH QUALITY OF CUT    The Soft Ride Stand-On SRS™ Z2 raises the bar with our adjustable operator platform, which features suspension technology that optimize...